Factory wholesale Telescopic Boom Crane - CHEAP TELEHANDLER FOR INDUSTRY – Wilson

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

We support our purchasers with ideal premium quality products and substantial level company. Becoming the specialist manufacturer in this sector, we've acquired rich practical working experience in producing and managing for Tractor Man Lift , Best Telehandler 2019 , Simon Boom Lift , Never-ending improvement and striving for 0% deficiency are our two main quality policies. Should you need anything, don't hesitate to contact us.
Factory wholesale Telescopic Boom Crane - CHEAP TELEHANDLER FOR INDUSTRY – Wilson Detail:

Product Parameter

MODEL XWS-840 ITEMS UNIT PARAMETERS
Performance parameters Rated load weight (Min. distance from front wheels) Kg 4000
Distance from fork center to front wheels mm 1750
Max. lifting weight Kg 6200
Distance from lifting bolt to front wheels mm 500
Max. liftinging height mm 7924
Max. front extension mm 5850
Max. running speed Km/h 28
Max. climbing ability ° 25
Machine weight Kg 7700
Working device Telescopic booms Sections 3
Stretch out time s 13
Shrinking time s 15
Max. lifting angle ° 60
Overall size Length (Without forks) mm 5400
Width mm 2200
Height mm 2300
Distance between shafts mm 2800
Wheels tread mm 1700
Min. ground clearance mm 320
Min.turning radius (Two wheels driving) mm 4000
Min.turning radius (Four wheels driving) mm 3650
Standard fork size mm 1200*125*50
Standard configuration Engine model - LR4A3LU
Rated power Kw 73.5/2200
Driving - Front wheels
Turing - Rear wheels
Tire types (Front/Rear ) - 16/70-20-18PR/10PR

 Product Details

WHEEL-FORKLIFTS-TELESCOPICWHEEL-TELEHANDLERS

A telescopic handler, also called a telehandler, teleporter, reach forklift, or zoom boom, is a machine widely used in agriculture and industry and the other fields.

Product Detailsimg (1)

In industry, the most common attachment for a telehandler is pallet forks and the most common application is to move loads to and from places unreachable for a conventional forklift. For example, telehandlers have the ability to remove palletised cargo from within a trailer and to place loads on rooftops and other high places. The latter application would otherwise require a crane, which is not always practical or time-efficient.

Product Detailsimg (2)

In agriculture the most common attachment for a telehandler is a bucket or bucket grab, again the most common application is to move loads to and from places unreachable for a ‘conventional machine’ which in this case is a wheeled loader or backhoe loader. For example, telehandlers have the ability to reach directly into a high-sided trailer or hopper. The latter application would otherwise require a loading ramp, conveyor, or something similar.

The telehandler can also work with a crane jib along with lifting loads, the attachments that include on the market are dirt buckets, grain buckets, rotators, power booms. The agricultural range can also be fitted with three-point linkage and power take-off.

The advantage of the telehandler is also its biggest limitation: as the boom extends or raises while bearing a load, it acts as a lever and causes the vehicle to become increasingly unstable, despite counterweights in the rear. This means that the lifting capacity quickly decreases as the working radius (distance between the front of the wheels and the centre of the load) increases. When used as a loader the single boom (rather than twin arms) is very highly loaded and even with careful design is a weakness. A vehicle with a 2500kgs capacity with the boom retracted may be able to safely lift as little as 225 kg with it fully extended at a low boom angle. The same machine with a 2500kgs lift capacity with the boom retracted may be able to support as much as 5000kgs with the boom raised to 65°. The operator is equipped with a load chart which helps him determine whether a given task is possible, taking into account weight, boom angle and height. Failing this, most telehandlers now utilize a computer which uses sensors to monitor the vehicle and will warn the operator and/or cut off further control input if the limits of the vehicle are exceeded. Machines can also be equipped with front stabilizers which extend the lifting capability of the equipment while stationary, as well machines which are fully stabilised with a rotary joint between upper and lower frames, which can be called mobile cranes although they can typically still use a bucket, and are also often referred to as ‘Roto’ machines. They are a hybrid between a telehandler and small crane.

Several steps before you use the telehandlers.
Step1. According to your task, ground grade, wind speed, attachments, choose a suitable machine model. See the parameters, loading diagrams and the overall size of the machine. The overload is prohibited.
Step 2. Install the attachment onto the end of the boom, make sure all the nuts are screwed tightly and the oil pipes well connecting without leaking.
Step 3.Check all the functions to make sure all of them can move smoothly without abnormal sounds.
Step 4.The other requirement please fellow the introductions.


Product detail pictures:

Factory wholesale Telescopic Boom Crane - CHEAP TELEHANDLER FOR INDUSTRY – Wilson detail pictures

Factory wholesale Telescopic Boom Crane - CHEAP TELEHANDLER FOR INDUSTRY – Wilson detail pictures

Factory wholesale Telescopic Boom Crane - CHEAP TELEHANDLER FOR INDUSTRY – Wilson detail pictures


Related Product Guide:

We support our purchasers with ideal high-quality merchandise and significant level company. Becoming the specialist manufacturer in this sector, we now have received loaded practical encounter in producing and managing for Factory wholesale Telescopic Boom Crane - CHEAP TELEHANDLER FOR INDUSTRY – Wilson, The product will supply to all over the world, such as: kazakhstan, Sheffield, Auckland, As a way to make use of the resource on the expanding information and facts in international trade, we welcome prospects from everywhere on the web and offline. In spite in the top quality products we offer, effective and satisfying consultation service is supplied by our specialist after-sale service group. Solution lists and detailed parameters and any other info weil be sent to you timely for the inquiries. So please get in touch with us by sending us emails or contact us if you have any concerns about our firm. ou can also get our address info from our web site and come to our enterprise. or a field survey of our solutions. We're confident that we are going to share mutual results and build solid co-operation relations with our companions in this market. We're looking forward to your inquiries.
  • A nice supplier in this industry, after a detail and careful discussion, we reached a consensus agreement. Hope that we cooperate smoothly.
    5 Stars By Elvira from Canberra - 2018.11.11 19:52
    This is a reputable company, they have a high level of business management, good quality product and service, every cooperation is assured and delighted!
    5 Stars By Belinda from Maldives - 2017.01.11 17:15

    Related Products