Factory Supply Telehandler Reach - TELE LOADER FOR MAINTENANCE – Wilson

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

Our company puts emphasis on the management, the introduction of talented personnel, and the construction of staff building, trying hard to improve the quality and liability consciousness of staff members. Our company successfully attained IS9001 Certification and European CE Certification of Towing Boom Lift , One Man Bucket Lift , Skid Steer Truss Boom , Our organization has been devoting that "customer first" and committed to helping clients expand their small business, so that they become the Big Boss !
Factory Supply Telehandler Reach - TELE LOADER FOR MAINTENANCE – Wilson Detail:

Product Parameter

MODEL XWS-980 ITEMS UNIT PARAMETERS
Performance parameters Rated load weight (Min. distance from front wheels) Kg 8000
Distance from fork center to front wheels mm 2050
Max. lifting weight Kg 12000
Distance from lifting bolt to front wheels mm 500
Max. liftinging height mm 8270
Max. front extension mm 5850
Max. running speed Km/h 30
Max. climbing ability ° 23
Machine weight Kg 10900
Working device Telescopic booms Sections 3
Stretch out time s 13
Shrinking time s 15
Max. lifting angle ° 60
Overall size Length (Without forks) mm 6000
Width mm 2300
Height mm 2350
Distance between shafts mm 3100
Wheels tread mm 1780
Min. ground clearance mm 375
Min.turning radius (Two wheels driving) mm 4100
Min.turning radius (Four wheels driving) mm 3800
Standard fork size mm 1200*180*60
Standard configuration Engine model - LR4M3LU
Rated power Kw 88.2/2400
Driving - Front wheels
Turing - Rear wheels
Tire types (Front/Rear ) - 10.00-20 (4/2)

Product Details

TELESCOPIC-LOADERS-BOOM TELESCOPIC-BOOM-LOADERS

A telescopic handler, also called a telehandler, teleporter, reach forklift, or zoom boom, is a machine widely used in agriculture and industry and the other fields.

Product Detailsimg (1)

In industry, the most common attachment for a telehandler is pallet forks and the most common application is to move loads to and from places unreachable for a conventional forklift. For example, telehandlers have the ability to remove palletised cargo from within a trailer and to place loads on rooftops and other high places. The latter application would otherwise require a crane, which is not always practical or time-efficient.

Product Detailsimg (2)

In agriculture the most common attachment for a telehandler is a bucket or bucket grab, again the most common application is to move loads to and from places unreachable for a ‘conventional machine’ which in this case is a wheeled loader or backhoe loader. For example, telehandlers have the ability to reach directly into a high-sided trailer or hopper. The latter application would otherwise require a loading ramp, conveyor, or something similar.

The telehandler can also work with a crane jib along with lifting loads, the attachments that include on the market are dirt buckets, grain buckets, rotators, power booms. The agricultural range can also be fitted with three-point linkage and power take-off.

The advantage of the telehandler is also its biggest limitation: as the boom extends or raises while bearing a load, it acts as a lever and causes the vehicle to become increasingly unstable, despite counterweights in the rear. This means that the lifting capacity quickly decreases as the working radius (distance between the front of the wheels and the centre of the load) increases. When used as a loader the single boom (rather than twin arms) is very highly loaded and even with careful design is a weakness. A vehicle with a 2500kgs capacity with the boom retracted may be able to safely lift as little as 225 kg with it fully extended at a low boom angle. The same machine with a 2500kgs lift capacity with the boom retracted may be able to support as much as 5000kgs with the boom raised to 65°. The operator is equipped with a load chart which helps him determine whether a given task is possible, taking into account weight, boom angle and height. Failing this, most telehandlers now utilize a computer which uses sensors to monitor the vehicle and will warn the operator and/or cut off further control input if the limits of the vehicle are exceeded. Machines can also be equipped with front stabilizers which extend the lifting capability of the equipment while stationary, as well machines which are fully stabilised with a rotary joint between upper and lower frames, which can be called mobile cranes although they can typically still use a bucket, and are also often referred to as ‘Roto’ machines. They are a hybrid between a telehandler and small crane.

Several steps before you use the telehandlers.
Step1. According to your task, ground grade, wind speed, attachments, choose a suitable machine model. See the parameters, loading diagrams and the overall size of the machine. The overload is prohibited.
Step 2. Install the attachment onto the end of the boom, make sure all the nuts are screwed tightly and the oil pipes well connecting without leaking.
Step 3.Check all the functions to make sure all of them can move smoothly without abnormal sounds.
Step 4.The other requirement please fellow the introductions.


Product detail pictures:

Factory Supply Telehandler Reach - TELE LOADER FOR MAINTENANCE – Wilson detail pictures

Factory Supply Telehandler Reach - TELE LOADER FOR MAINTENANCE – Wilson detail pictures

Factory Supply Telehandler Reach - TELE LOADER FOR MAINTENANCE – Wilson detail pictures


Related Product Guide:

Our eternal pursuits are the attitude of "regard the market, regard the custom, regard the science" and the theory of "quality the basic, trust the first and management the advanced" for Factory Supply Telehandler Reach - TELE LOADER FOR MAINTENANCE – Wilson, The product will supply to all over the world, such as: Jamaica, Turkey, Hungary, Our solutions have national accreditation standards for experienced, premium quality items, affordable value, was welcomed by people around the globe. Our goods will continue to increase in the order and look forward to cooperation with you, Really should any of those products be of interest to you, please letus know. We are going to be pleased to give you a quotation up on receipt of one's detailed specifications.
  • This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately, we successfully completed the procurement tasks.
    5 Stars By Alice from Libya - 2017.12.31 14:53
    This enterprise in the industry is strong and competitive, advancing with the times and develop sustainable, we are very pleased to have a opportunity to cooperate!
    5 Stars By Gabrielle from Finland - 2017.11.29 11:09

    Related Products